Innovation and technology, has always been our pursuit

Over the years, enterprises adhere to independent innovation, is committed to creating low-carbon economic development model, annual investment in R & D sales accounted for more than 5% of enterprises, has long been fully master the core technology and core self-supporting ability, self-developed pre-installed Type substation, ring network switching equipment, load switch, wind power switchgear, smart grid system and many other products reach the international leading water
Ping, China is a number of variable power distribution products, the main drafting of national standards.

PRODUCT CENTER
V40 Intelligent Charger
    Publish time 2016-11-08 10:19    
V40 Intelligent Charger

V40 Charge
Product parameters
1, DC input voltage: 12V / 2.0A
2, lithium-ion battery charging current: 4.2V 300mA / 500mA / 700mA / 1000mA
3, NiMH battery charging current: 1.48V 300mA / 500mA / 700mA / 1000mA
4, rechargeable battery specifications: 18350,18650,26650,14500, AA, AAA and so on
5, the discharge current: 250mA, 500mA
6, USB output: 5V --- 1000mA
7, termination: intelligent voltage monitoring
8, size: 162mm (length) * 96mm (width) * 36mm (high).

Simple to use introduction
V40 charger can support 3.7V Li-ion battery and nickel-metal hydride battery, does not support 3.V Li-Fe battery.

Mode key


Charge mode
Press the Mode button for 3 seconds to enter the mode switch, then press the Mode button to select the Charger mode.
Charge mode, the charger is only charging the battery, fully charged to stop working, charge cut-off voltage of 4.2V (0.05V error).

Fasttest mode
Press Mode button for 3 seconds to enter the mode switch, then press Mode button to select Fasttest mode.
Fasttest mode, the charger is only the battery discharge, discharge after the power to stop working, discharge cut-off voltage 2.8V (0.05V error).

NorTest mode
Press Mode button for 3 seconds to enter the mode switch, then press the Mode button to select Nortest mode.
In the Nortest mode, the charger fully charges the battery and then automatically discharges it. During the discharge process, the battery power is calculated and displayed in real time on the LCD screen. When the battery is discharged, the Nortest mode is finished. That is, the battery capacity. Finally, the battery charger will also be filled.

Current key
The Current button is only available when the selection mode is selected, and you can select 300mA / 500mA / 700mA / 1000mA.

1-2-3-4 Key
The charger is completely independent of each channel for the corresponding battery channel keys.

LCD display
Charge: Charge mode works only to charge the battery.
Fast test: Fast test mode, only the battery discharge.
Nor Test: Nor test mode of operation, the test capacity of the battery.
END: End of work.
V: Battery voltage.
mAh: battery capacity capacity.
h: Working time.
mR: battery resistance
 : USB 5V output.
Current 300mA 500mA 700mA 1000mA: Charge current selection.

Note: The V40 charger does not support the 3.V Li-Fe battery.