Innovation and technology, has always been our pursuit

Over the years, enterprises adhere to independent innovation, is committed to creating low-carbon economic development model, annual investment in R & D sales accounted for more than 5% of enterprises, has long been fully master the core technology and core self-supporting ability, self-developed pre-installed Type substation, ring network switching equipment, load switch, wind power switchgear, smart grid system and many other products reach the international leading water
Ping, China is a number of variable power distribution products, the main drafting of national standards.

V30 Intelligent Charger
    Publish time 2016-11-08 10:18    
V30 Intelligent Charger

Product parameters


DC input voltage: 12V / 1.5A

Lithium battery charging current: 2 * (4.2V 500mA), 2 * (4.2V 1000mA)

NiMH battery charging current: 2 * (1.48V 500mA), 2 * (1.48V 1000mA)

Discharge current: 2 * 500mA

USB output: 5 ± 0.2V --- 1000mA

Terminate Mode: intelligent voltage monitoring

Dimensions: 140mm (length) * 68mm (width) * 31mm (height).


Supported Battery

Lithium Battery: 26650,22650,26500,18650,18490,17670,17500,17355,16340,14500,10440 etc.

NiMH batteries: AAA / AA / A / SC / S, etc.


Warning: V30 charger is not supported lithium iron phosphate batteries



USB 5V boost output


USB 5V only as a 3.7V lithium battery boost output, the output current of 1000mAh (nickel-metal hydride battery is invalid).

When the adapter is turned on when the charger USB 5V invalid.

When the 3.7V lithium battery can be put into any one of the effective output slot.

The V40 USB 5V output for the market most mobile electronic devices, but not all of the products tested, so do not rule out some 5V electronic products do not apply.


Charge and DisCharge

Press the MODE button for 3 seconds to switch "Charge" or "DisCharge" mode, and you can choose 500mA / 1000mA charging current. Do not operate within 8 seconds, which is the default "Charge" mode 500mA current job.

Under "DisCharge" mode, the discharge current default is 500mA.

Charge: only charge the battery until the battery is fully charged after stop working.

DisCharge: test battery capacity. First, the battery is fully charged and then discharge the battery and record power display on the LCD screen until the battery discharge finished (End flashes on the screen at this time, you can see the battery's capacity) then the battery is fully charged .


Keys and display description


Mode: switch "Charge and DisCharge" mode.

Charge: Charge mode, only the battery.

DisCharge: DisCharge mode, test the battery capacity.

End: work is completed.

mA: charging current.

mAh: battery power.

h: Working Hours (hh: mm).

mR: battery internal resistance.



This charger can only charge the lithium-ion battery (Li-ion) and nickel metal hydride batteries (Ni-MH), unsuitable for rechargeable lithium-iron battery (Li-Fe).

Before use, please carefully refer to the instructions, the correct operation of the charger.

Do not use other adapters.

When the charger work may be hot, be careful not to burn.

When not in use, unplug the power and removing the battery.

This product test data for reference only, please refer to the actual situation of professional equipment.